Bobrick Washroom

It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement. The Saniaccess 3 is simplicity itself to install; there are just four connections. The toilet tank is connected to the water supply. The inside of the unit comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the Saniaccess 3 activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to slurry as the macerator blades rotate at RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor.

“Help for sailboat owners, easy repairs, equipment replacement and DIY projects”

However, as much as we want to think they are just like them, they really aren’t! There are 2 main differences between an RV Toilet and a house type one. The house style toilet will have a large “water reserve” tank attached to the toilet to flush waste away. The house style toilet will also have a “trap” within it’s basic design to trap water within it’s base to keep sewer fumes out and help rinse away waste residue.

OK – so, just how does an RV Toilet system work?

Throw a towel on the floor underneath to catch water that will drain from the line.

While there are plenty of inexpensive options, the high tech models can definitely have an impact on your wallet. So, decide on a price range and features you would like and it will make your life so much easier. In general, the measurement is about twelve inches, but there may also be cases when the measurement of the drain has a one inch difference from the regular rough-in distance.

Bowl Shape You can go with either an elongated or a round front for the shape of the bowl. If you have a larger bathroom, then the elongated front is a good idea, but if your space is limited, then go for a bowl with a round front. Design There are 3 types of models you can buy, including wall mounted, two pieces and one piece. Wall mounted models are not that common, but you can easily sweep underneath them. Lastly, two piece models are the norm and most people will get this type.

Just make sure to choose the height that best meets your needs. As you can see, buying a new model is not that simple and there are many things you need to keep in mind before spending your hard earned money on one. You can also read more Toto toilet reviews here. Not only does it look classy, but it also has a high-profile and features a Double Cyclone flushing system which ensures that the bowl is kept clean at all times, even in the hardest-to-reach spaces.

The combination of the jet flushing action and gravity keeps debris and bacteria from clinging to the interior of the bowl. Not only will this make it possible to eliminate the use of strong cleaning detergents, but also help it stay cleaner for longer.

How to Hook Up the Toilet Drain to an Existing Drain

Potty Humor Toilet a-Store About Us Plumbing for a Toilet Putting in the plumbing for a toilet is actually more work than putting in the fixture itself. There are freshwater pipes that will be under pressure to be connected. There are drainpipes that must also be vented and properly sloped.

What does this mean?

But when a toilet threatens to overflow, runs incessantly, or leaks onto the floor, we gain a full appreciation of what it means to have it working properly. This site is a one-stop resource for free, expert advice about toilet repair and care. Many toilet repairs can be surprisingly quick and easy for do-it-yourselfers—and doing your own repairs often makes sense, for a couple of reasons: To handle many basic toilet repairs, you just need a few tools, such as a toilet plunger, pliers, screwdriver, and wrench.

Before you begin, it helps to become familiar with the basic workings of a toilet. The toilet, though not one of the more glamorous of home fixtures, is designed to do a very specific job—to carry away waste and prevent sewer gases from entering the house. And unless something goes wrong with a toilet, it handles its job adroitly.

Toilet Construction As shown in the illustrations at right and above, a toilet has two main parts, both made from vitreous china: Some toilets are cast as a single piece while others are made in two separate parts that are joined together.

How to install a TOTO Washlet: TOTO Washlet

Introduction Disconnect the Supply Line After turning off the water at the shutoff, flush the toilet to remove most of the water from the tank and bowl. A little water will be left in the bowl. Use a force-cup plunger to force it down the drain line. Remove the remaining water from the tank with a sponge and a bucket.

Or if you have a lot of sand or grit or have a low pH or “aggressive” water source then parts simply won’t last as long as the ‘average’ length of time.

July 20, at My son flushed a 4-pack soap plastic wrapper down the toilet. We flushed the toilet a few times and water drains really slow. What can we do to get that out? Will the augur work? Do you think the auger thing will help to get it out??? I already tried stickin my hand in there buti cnt feel it. Gina May 8, at We tried a bent hanger and then I noticed something strange in the way it was going in… I got my rubber kithen gloves and reached on in there… I was able to pull out a small plastic turtle bath toy!

I felt like I conquered the world. Thanks for the inspiration!! Erika April 17, at 6: Batman was flushed down today accidently when my 4yo was going to the bathroom.

Installation of ‘rear discharge’ toilet

Connect sewer hose to RV park sewer connection with a dip in the hose providing a sewer vapor block. See the illustrations above. Open both the black and gray water discharge valves. When putting solids into the toilet, flush and then fill the toilet bowl twice 2 times to the top with water and flush. The force of these 2 flushes will push all the solids out of the black water tank into the parks sewer line, stopping any vapors going up the tank vent.

Remove the coupling nut Unscrew the coupling nut that connects the supply line.

I never imagined we would use it as frequently as we do. We have a Thetford C4 Cassette Potti in our pop up camper. We have an access door to the tank inside the camper, but many models have access doors located on the outside of the camper. Either way, when you open the access door, this is what you will most likely find. As you fill the fresh water tank with clean water, pay close attention to the glass vial on the side of the tank. You can also use an additive in the flush tank, but we never have.

If you have a drain nozzle on the side of the fill spout, unscrew it and let the water drain into a cup. If you have no drain nozzle, your fill spout may be designed to rotate.

Public toilet

Robert Hooke No portrait survives of Robert Hooke. His name is somewhat obscure today, due in part to the enmity of his famous, influential, and extremely vindictive colleague, Sir Isaac Newton. Yet Hooke was perhaps the single greatest experimental scientist of the seventeenth century. His interests knew no bounds, ranging from physics and astronomy, to chemistry, biology, and geology, to architecture and naval technology; he collaborated or corresponded with scientists as diverse as Christian Huygens, Antony van Leeuwenhoek , Christopher Wren, Robert Boyle, and Isaac Newton.

With those you hook the sewer line which is an accordion-fold pipe, usually stored in one of the bumpers to the unit, and lower the other end into the dump pipe.

Kohler flush problems If it has a power flush i. To clean it, use a bent coat hanger and ream out the deposits as far in as you can reach. Then turn off the water supply, flush the toilet, then quickly pour one pail full of water into the toilet to drop the water level to minimum. In morning turn on water flush a few times, should wok good as new. Repeat anytime hole starts to get plugged. Aug 21, Home Toilet flushes but does not have the power to flush down waist If it has a power flush i.

Camper Fresh Water & Plumbing

Fixing a Clogged Toilet 1 Shut the water off. If your toilet has become clogged, don’t try to flush it or you’ll risk overflowing the toilet. Find the water valve on the wall that connects the waterline to the toilet and turn it clockwise until it stops. Water should stop coming into the tank. With any tank or flushing issue, you’ll want to shut the water off first as a safety precaution. Cleaning up a toilet that’s overflown is obviously the biggest of bummers.

Batman was flushed down today accidently when my 4yo was going to the bathroom.

I have a three-tiered closet. No problem reaching the top level once you get the hang of it. It is long enough to reach the highest rung in our closet. Shipping was fast and it was easy to assemble. It seems like you may have to keep tightening it up where the pieces screw together. I will be buying one for my daughters as well as my sister.

There are no telescoping parts or other weak joints. I like that there is a choice of 2 lengths. Helpful in the garage too.

How To Install A Toilet Part 2 of 3

Greetings! Do you want find a sex partner? It is easy! Click here, free registration!